ROOF-SOLAR BITUMEN FLAT
Mounting for photovoltaic panels on bitumen waterproofing
The use of 60 cm Roof-Solar Bitumen rails results in a linear load distribution (and not a point load), thus reducing the risk of puncturing.
Avis Technique N°21/24-86
Landscape orientation
Portrait orientation
Green List C2P
Documentation & Downloads
Request the manual
Contact us for technical evaluation
Ask for a service
Advantages of the system
A solution evaluated by a committee of experts
Technically evaluated by a Technical Approval (ATec) from the commission in charge of formulating technical opinions (CCFAT), this mounting system has proven its reliability through rigorous tests: wind resistance, bending under descending loads (in case of heavy snowfall), tensile test of the entire system and creep test.
Roof-Solar Bitume also has a Broof (t3) fire resistance rating.
Photovoltaic mounting suited to public buildings
The Roof-Solar Bitumen mounting can now be found on large roofs such as those of supermarket chains: E.Leclerc, Système U, Les Mousquetaires (Intermarché), but also of stores specialising in organic food such as Biocoop, etc. There are many examples of its use on public buildings which attest to the quality of this photovoltaic mounting system.
A minimum load
Roof-Solar Bitumen allows solar panels to be installed on the roof in such a way that the added load on the building structure is as low as possible. The pre-assembled rails with the bitumen retaining strips are thermally welded to the bitumen membrane. Ballasting is therefore not required.
A premium metal: aluminium
The Roof-Solar Bitumen photovoltaic process uses mostly aluminium. This metal has many advantages including being light, strong, recyclable and highly resistant to corrosion.
Technical data
| USE | Enclosed building, new roof or total or partial renovation |
| TYPE OF ROOF | Concrete, ribbed steel sheets, wood. Insulation of compressibility class C. Bitumen waterproofing membrane. |
| MODULE POSITION | Landscape or portrait |
| MATERIALS | Aluminium, stainless steel and bitumen |
| SYSTEM WEIGHT | 3 kg/m² |
| SYSTEM COMPONENTS | 0.6 m aluminium rails fitted with retaining strips, universal aluminium/stainless steel clamp, external clamp with aluminium/stainless steel finish, Rail Grounding Connector (RGC), generator connector, Module Grounding Connector (MGC), cable guide |
Roof-Solar Bitumen
The Roof-Solar Bitumen system from Dome Solar is a mounting solution for photovoltaic panels on flat roofs with bitumen waterproofing.
This solution has undergone a technical evaluation by a Technical Approval from the commission in charge of formulating technical opinions (CCFAT).
Benefit from training and first worksite assistance
Our experts share their tips and practical advice for quick and efficient installation
Discover all our products
SIMPLE TO IMPLEMENT
Dome Solar Roof-Solar Bitumen photovoltaic system has undergone a technical evaluation by a Technical Approval (Avis Technique – ATec). It also has a Broof (t3) fire resistance rating. With the Roof-Solar Tilted Bitumen mounting process, they also have a New Technology Survey (Enquête de Technique Nouvelle – ETN).
The first layer is fixed mechanically.
INSTALLING SOLAR PANELS ON A FLAT ROOF WITH BITUMEN WATERPROOFING
Rails of Roof-Solar Bitumen and Roof-Solar Tilted Bitumen photovoltaic mounting are heat-welded (read more about the steps here) to the bitumen membrane. Once External Clamps and then Universal Clamps have been clipped on, photovoltaic panels can be installed. Due to the heat-welding technique, no ballast needs to be added to building’s roof which reduces the weight. Moreover, membrane perforation is not required so there is no risk of water leaking in.
RESPONSIVENESS AND AVAILABILITY
TECHNICAL DOCUMENTS
TRAINING AND 1ST SITE ASSISTANCE
Supporting our customers is at the heart of our mission
At Dome Solar, your satisfaction is our priority. We are committed to making every interaction as pleasant and simple as possible by supporting you every step of the way.
