ROOF-SOLAR EVALON Incliné
The Photovoltaic Panel Mounting System Heat-Welded onto EVALON Synthetic Membrane
Designed for the installation of solar panels, Roof-Solar EVALON Incliné is a photovoltaic mounting system for flat roofs. It is dedicated to buildings whose roof is composed of an EVALON synthetic membrane. Without ballasting or membrane perforation, the installation of photovoltaic panels is thus facilitated.
The use of 60 cm Roof-Solar EVALON rails allows for a linear distribution (rather than punctual) of the load, consequently reducing the risk of punching.
ATEx N°3431
Portrait Orientation
Documentation & Downloads
Download Instructions
Download Technical Assessment
Request a Service
Benefits of ROOF-SOLAR EVALON INCLINÉ
System Advantages
A Solution Evaluated by an Expert Committee
Covered by a Technical Experimentation Assessment (ATEx case A), this mounting system has demonstrated its reliability through rigorous tests: wind resistance, downward load bending test (in case of heavy snowfall), traction test of the entire system, and creep test.
Photovoltaic Mounting System Adapted for Very High Humidity Environments
The Roof-Solar EVALON mounting system, when the coating is applied with adhesion on cellular glass, can be used in premises with very high humidity.
Minimal Load
Roof-Solar EVALON allows for the installation of solar panels on the roof such that the added load on the building’s structure is as low as possible. The pre-assembled rails with EVALON Dual retaining strips are heat-welded to the synthetic membrane. Therefore, no ballasting is required.
A Premium Metal: Aluminum
The Roof-Solar EVALON photovoltaic system is primarily composed of aluminum. This metal has many advantages, including being lightweight, strong, recyclable and highly resistant to corrosion.
ROOF-SOLAR EVALON INCLINÉ
Technical Specifications
USE | New roof, repair, or renovation |
SUPPORT TYPE |
Ribbed Steel Sheets Insulation with Compressibility Class C EVALON V waterproofing membrane mechanically fastened or fully adhered to cellular glass |
MODULE POSITION | Portrait |
SYSTEM WEIGHT | 4.5 kg/m² |
SYSTEM COMPONENTS |
6060 Aluminum Rail + EVALON Dual Retaining Strips Tilt Support Universal Mounting (MALT modules included) and 6060 Aluminum/Stainless Steel Exterior Finishing Mounting 6060 Aluminum Bottom Generator Connector 6060 Aluminum Rail Ground Connector (CTR) Polyamide Cable Clamp |
Benefit from Training and First-Site Assistance
Our Experts Share Practical Tips and Advice for Quick and Efficient Installation
Evaluated Reliability for your Photovoltaic Projects
Discover for yourself the quality of our ATEx-evaluated Roof-Solar EVALON mounting system.
We guarantee the conformity of our products, minimizing risks of claims for total peace of mind.
Successfully Carry Out Your Photovoltaic Projects with Confidence with Dome Solar.
ATEx Technical Assessment
Claim Reduction
Installation Advice
Discover all our Products
New Dome Solar Catalog
EASY TO INSTALL
The photovoltaic systems Dome Solar Roof-Solar EVALON and Roof-Solar EVALON Incliné are evaluated by a Technical Experimentation Assessment (ATEx). The membrane is installed by mechanical fastening or full adhesion on cellular glass.
INSTALLATION OF SOLAR PANELS ON AN EVALON FLAT ROOF
The rails of the Roof-Solar EVALON and Roof-Solar EVALON Incliné photovoltaic mounting systems are hot-air welded to the EVALON membrane. Once the exterior fixings and then the universal fixings are clipped, the photovoltaic panels can be installed. Thanks to the hot-welding technique, no ballast needs to be added to the building’s roof, which reduces the weight. Furthermore, membrane perforation is not necessary, thus eliminating the risk of water infiltration.
Client Support at the Heart of our Mission
We are committed to making every interaction as pleasant and simple as possible by supporting you at every step of your journey.