ROOF-SOLAR EVALON
The Mounting System for Photovoltaic Panels on EVALON Synthetic Membrane
Roof-Solar EVALON is a mounting system for installing photovoltaic panels on flat roofs. It is designed for buildings with roofs made of EVALON synthetic membrane. Without ballasting or perforating the membrane, the installation of photovoltaic panels is facilitated, thereby preserving the perfect integrity of the building.
The use of 60 cm Roof-Solar EVALON rails allows for a linear (rather than point) load distribution, thereby reducing the risk of punching.
ATEx No. 3431
Portrait Orientation
Landscape Orientation
Documentation & Downloads
Download Instructions
Download the Technical Assessment
Request a Service
ROOF-SOLAR EVALON Benefits
System Advantages
A Solution Assessed by an Expert Committee
Subject to a Technical Experimental Assessment (ATEx case A), this mounting system has demonstrated its reliability through rigorous tests: wind resistance, downward load bending test (in case of heavy snowfall), tensile test of the entire system, and creep test.
Photovoltaic Mounting System Suitable for Very High Humidity Environments
The Roof-Solar EVALON mounting system, in cases where the coating is applied with adhesion to cellular glass, can be used in premises with very high humidity.
Minimal Load
Roof-Solar EVALON allows for the installation of solar panels on the roof so that the added load on the building structure is as low as possible. The pre-assembled rails with EVALON Dual retaining strips are heat-welded to the synthetic membrane. Therefore, no ballasting is required.
A Premium Metal: Aluminum
The Roof-Solar EVALON photovoltaic system is primarily composed of aluminum. This metal offers many advantages, including being lightweight, strong, recyclable, and it resists corrosion very well.
ROOF-SOLAR EVALON
Technical Specifications
USAGE | New, Refurbished, or Renovated Roof |
WATERPROOFING SYSTEM |
Ribbed Steel Sheets Insulation with Compressibility Class C EVALON V Waterproofing Membrane Mechanically Fastened or Fully Adhered to Cellular Glass |
SYSTEM ORIENTATION | Landscape or Portrait |
SYSTEM WEIGHT | 2 kg/m² |
SYSTEM COMPONENTS |
6060 Aluminum Rail + EVALON Dual Retaining Strips Universal Mounting (MALT modules included) and 6060 Aluminum/Stainless Steel Exterior Finishing Mounting 6060 Aluminum Module Bottom Connector 6060 Aluminum Rail Earth Connector (CTR) Polyamide Cable Clamp |
Benefit from Training and First-Site Assistance
Our Experts Share Tips and Practical Advice for Quick and Efficient Installation
Evaluated Reliability for your Photovoltaic Projects
Discover for yourself the quality of our Roof-Solar EVALON mounting system, ATEx-evaluated.
We guarantee the conformity of our products, minimizing risks of damage for complete peace of mind.
Successfully Complete Your Photovoltaic Projects with Full Confidence with Dome Solar.
ATEx Technical Assessment
Damage Reduction
Installation Advice
Discover all our Products
New Dome Solar Catalog
Easy to Install
The Dome Solar Roof-Solar EVALON and Roof-Solar EVALON Inclined photovoltaic systems are evaluated by a Technical Experimental Assessment (ATEx). The membrane is installed by mechanical fastening or full adhesion to cellular glass.
INSTALLATION OF SOLAR PANELS ON AN EVALON FLAT ROOF
The rails of the Roof-Solar EVALON and Roof-Solar EVALON Inclined photovoltaic mounting systems are hot-air welded to the EVALON membrane. Once the exterior fastenings and then the universal fastenings are clipped, the photovoltaic panels can be installed. Thanks to the hot-welding technique, no ballast needs to be added to the building’s roof, which reduces the weight. Furthermore, membrane perforation is not necessary, thus eliminating the risk of water infiltration.
Client Support at the Heart of our Mission
We are committed to making every interaction as pleasant and simple as possible by supporting you at every step of your journey.